
Fire-retardant plywood for rail transport
Fire-retardant solutions compliant with EN 45545-2
Paged fire-retardant plywood for railway applications meets the highest requirements for the fire hazard level according to EN 45545-2.

EN 45545-2 sets out the requirements for the reaction to fire of materials and products used in rail vehicles. Vehicles are classified according to three fire hazard levels – from HL1, the lowest, to HL3, the highest. The level depends on the train’s route, that is, how quickly a passenger can reach a place of safety in the event of fire, and on the type of train, e.g. a sleeping car or a double-decker train.
The requirements for the material itself depend on where it is located in the vehicle – the standard describes 26 such groups, from R1 to R26. Our plywood achieves HL3 under requirement R10, i.e. in flooring systems, and HL2 under requirements R1, R2 and R7, which cover walls, ceilings and interior fittings.
1Floor – R102Interior – R1, R2, R7Compliance with fire safety regulations – in accordance with the requirements set out in standard EN 45545-2.
1Flooring systems
R10 requirements
Fire hazard level HL3
Products meeting the requirements:
2Walls, ceilings and fittings
R1 / R2 / R7 requirements
Fire hazard level HL2
Products meeting the requirements:
Maximum safety. Paged fire-retardant plywood for railway applications meets the highest requirements for the fire hazard level. Depending on the classification, it achieves HL3 under R10, and HL2 under R1, R2 and R7. It can be used, for example, in sleeping cars and in rail vehicles operating in tunnels without emergency evacuation facilities.
High strength
Hardwood plywood with high mechanical strength carries the loads of floors, walls and fit-out elements.
Compliance with standards and certification
Fire hazard level HL3 (R10) and HL2 (R1, R2, R7) according to EN 45545-2, confirmed by fire test reports.
Greater passenger comfort and safety
Paged Phon FR dampens vehicle noise and vibration, while the anti-slip films of Mesh FR and Hexa FR reduce the risk of slipping.
Wear resistance
Film-faced surfaces are resistant to abrasion and moisture, so they perform well on floors with heavy traffic.

Applications
The carriage floor and other horizontal upward-facing surfaces are subject to requirement R10. All our railway plywood achieves the highest level, HL3, under it, so you can match the solution to the zone of the vehicle.
Paged Phon FR is a composite panel made of hardwood plywood with a core of a special rubber sound-damping layer. It provides sound insulation of up to 33 dB, compared with approx. 27 dB for the other FR plywood products. It is also available in a version with phenolic film.

Requirement R1 covers vertical interior surfaces such as walls and doors, downward-facing surfaces including ceiling panels and storage compartments, and luggage compartments. Paged BirchPly FR meets level HL2 under it, as well as under requirements R2 and R7, so a single material can be used for walls, doors, ceilings, flaps and storage compartments.

Small interior trim and fittings (R2), luggage compartments (R1), sleeper seat and bed base panels and air ducts (R7) – we match FR solutions to the place of use and the required hazard level, including in the most demanding vehicles.
The products differ in more than their fire classification. The film-faced surfaces of Mesh FR and Hexa FR protect against moisture, but are not suitable for applying a covering. A covering can be applied to BirchPly FR, but it has no moisture protection. Phon FR and Master Form FR combine both features: the film-faced side is moisture-resistant, and a covering can be applied to the impregnated side.
Swipe the table sideways to see all products.
| Feature | ![]() Paged Phon FR |
![]() Paged BirchPly FR |
![]() ![]() ![]() Paged Mesh FR / Hexa FR |
![]() Paged Master Form FR |
|---|---|---|---|---|
| Fire hazard level and R requirements | HL3 (R10) | HL3 (R10)HL2 (R1, R2, R7) | HL3 (R10) | HL3 (R10) |
| Density | 920-1250 kg/m³beech wood920-1150 kg/m³hardwood | 640-760 kg/m³R10720-880 kg/m³R1, R2, R7 | 640-760 kg/m³ | 720-880 kg/m³beech wood640-760 kg/m³hardwood |
| Sound insulation | up to 33 dB | approx. 27 dB | approx. 27 dB | approx. 27 dB |
| Option to apply a covering | NOfilm-faced sideYESimpregnated side | YES | NO | NOfilm-faced sideYESimpregnated side |
| Mechanical strength | 8 | 8 | 9 | 10beech wood9hardwood |
| Moisture-proofing | YESfilm-faced sideNOimpregnated side | NO | YES | YESfilm-faced sideNOimpregnated side |
| Dimensional stability | 7beech wood8hardwood | 8 | 8 | 7beech wood8hardwood |
| Biological durability | 9film-faced side8impregnated side | 8 | 9 | 9film-faced side8impregnated side |
| Machining precision | 10beech wood9hardwood | 9 | 9 | 10beech wood9hardwood |
The numerical ratings compare Paged FR products and come from the presentation “FR products for railways” (2026). Thicknesses and formats can be found in the downloadable product overview and on the product pages.
Fire safety requirements for rail vehicles are set out in EN 45545-2. The compliance of Paged plywood with its requirements is confirmed by fire tests carried out in an accredited laboratory.
Standard
Part 2: Requirements for fire behaviour of materials and components.

Fire test report
Sychta Laboratorium – Materials Flammability Testing Laboratory, PCA accreditation AB 1501.
The products most often chosen in this segment. Each card leads to the full specification, technical data and documents.
Paged BirchPly FRHL3 (R10) and HL2 (R1, R2, R7) – floors, walls, ceilings and fittings; a covering can be applied.More about the product
Paged Mesh FRHL3 (R10) – anti-slip phenolic film for floors with heavy traffic.More about the product
Paged Hexa FRHL3 (R10) – anti-slip phenolic film with a hexagonal structure, for floors.More about the product
Paged Master Form FRHL3 (R10) – phenolic film, birch or beech version, film-faced on one or both sides.More about the product
Paged Phon FRHL3 (R10) – layer damping sound and vibration, sound insulation up to 33 dB.More about the productIf you are interested in working with us, fill in the form below.
Customer Service
