Hardwood plywood with phenolic film.












High-quality, thin-veneer hardwood plywood with an exterior-grade glue bond, faced with phenolic film, specifically designed for demanding formwork, construction and precast concrete applications, including the production of smaller elements such as paving stones or kerbs.
Paged Master Form was developed for formwork companies, precast concrete manufacturers and contractors carrying out demanding construction projects, where durability, a consistent concrete surface quality and the ability to reuse the panels many times are essential. The product is a high-grade, water-resistant hardwood plywood faced with phenolic film, designed for use in professional formwork systems.
For precast manufacturers, this means smooth and consistent concrete surfaces combined with high dimensional stability of the moulds. For contractors, it is a solution that allows the panels to be reused many times while maintaining the required concrete quality and reducing operating costs. In infrastructure and industrial applications, Master Form offers high resistance to mechanical loads, moisture and intensive use on site.

Paged Master Form is a water-resistant birch hardwood plywood intended for formwork applications. Depending on requirements, it is available as an all-hardwood construction or as a combi version using both hardwood and softwood veneers. The entire panel is produced with an exterior-grade glue bond intended for use in conditions of increased humidity.
The panel surface is faced with a durable phenolic film that protects the plywood against moisture, reduces concrete adhesion and increases the surface’s resistance to abrasion and mechanical damage. This makes it possible to achieve smooth concrete surfaces and to reuse the panels many times in professional formwork systems.

The key feature of Paged Master Form is its combination of high mechanical strength with resistance to moisture and intensive use. The plywood was designed for professional formwork systems used in the construction of walls, slabs, bridges and precast structures.
The phenolic film surface is resistant to abrasion, scratches and weathering. Depending on the type of phenolic film used, it achieves 320 to 600 cycles in the Taber test (EN 438-2+A1).
The product is available in thicknesses from 6.5 to 40 mm and in standard formats of 1250 × 2500 mm, 1250 × 3000 mm, 1500 × 2500 mm, 1500 × 3000 mm and 1500 × 3300 mm. The average density of the material is 640-760 kg/m³ at a moisture content of 8-12%.
Thanks to its high tensile strength, static and dynamic bending strength and dimensional stability, Master Form is used wherever a high-quality concrete surface and repeated use of the formwork facing are required.
The key benefit for the user is the ability to achieve smooth and consistent concrete surfaces while maintaining high panel durability and reducing the cost of replacing the formwork facing.
Paged Master Form is recommended for wall formwork in residential, industrial and infrastructure construction. The phenolic film delivers a high-quality concrete surface, and the high strength of the construction allows it to withstand considerable fresh concrete pressure.
In slab formwork, Master Form serves as a durable formwork facing working together with system props and beams. The product allows quick assembly and dismantling and can be reused many times while keeping the concrete surface smooth.
The plywood is widely used in precast concrete plants, where high dimensional repeatability and an attractive surface of the finished elements are required. Master Form enables the production of walls, slabs, structural elements and architectural precast elements with a high-quality finish.
In infrastructure construction, Master Form is used for bridges, tunnels, tanks, swimming pools and other structures that require durable, moisture-resistant formwork materials suitable for intensive use. Dimensional stability and surface resistance deliver consistent results even with complex structural geometries.
| Average density [kg/m³] | 640-760 |
| Bonding quality class [EN 314-2] | 3 |
| Formaldehyde emission class [EN 717-1] | E1 |
| Reaction to fire class* [EN 13501-1] | D-s2, d0 |
| Declaration of Performance (DoP) | Structural plywood; CE2+ |
| Type of face | Phenolic film |
| Base weight | 120 g/m² | 167 g/m² | 220 g/m² |
| Colour | Black, dark brown |
| Taber test [EN 438-2] | 320 | 440 | 600 |
| Number of cycles (uses)** | 20-80 |
IMPORTANT! If the product is cut into smaller formats or otherwise modified, the edges must be re-sealed.
*without an air gap, for thicknesses of 9 mm and above
**the estimated number of uses of the formwork plywood is indicative only; the actual number of reuses depends on factors related to how the plywood is used and handled
If you are interested in working with us, fill in the form or contact us directly.